NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 1 (2007-01-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 2 (2007-04-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 3 (2008-02-29)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 4 (2008-04-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 5 (2008-05-13)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 6 (2008-06-03)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 7 (2008-07-09)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 8 (2008-08-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 9 (2008-09-16)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.10(2008-10-17)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.11(2009-01-19)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.12(2009-03-04)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.13(2009-03-30)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.14(2009-05-25)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.15(2009-07-27)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.16(2010-02-01)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.17(2010-02-08)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.18(2010-03-23)

BATT - Batteries

IEC 62282-6-100 (2010-03) Ed. 1.0
Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety

CABL - Cables and Cords

IEC 60502-1-am1 (2009-09) Ed. 2.0
Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

CAP - Capacitors as components

No new IEC Standard(s)

CONT - Switches for appliances and automatic controls for electrical household appliances

IEC 60730-1 (2010-03) Ed. 4.0
Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-2-5-am2 (2008-11) Ed. 3.0
Amendment 2 - Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

IEC 61810-2 (2005-02) Ed. 1.0
Electromechanical elementary relays - Part 2: Reliability

EMC - Electromagnetic Compatability

IEC 61000-4-8 (2009-09) Ed. 2.0
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

CISPR 11-am1 (2010-03) Ed. 5.0
Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

IEC 62493 (2009-12) Ed. 1.0
Assessment of lighting equipment related to human exposure to electromagnetic fields

IEC 61000-4-28-am2 (2009-02) Ed. 1.0
Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

IEC 61000-4-12 (2006-09) Ed. 2.0
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

HOUS - Household and similar equipment

IEC 60335-1 (2010-05) Ed. 5.0
Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-109 (2010-05) Ed. 1.0
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances

INST - Installation accessories and connection devices

IEC 62444 (2010-08) Ed. 1.0
Cable glands for electrical installations

IEC 62196-1 (2003-04) Ed. 1.0
Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.

LITE - Lighting

IEC 61228 (2008-01) Ed. 2.0
Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

IEC 61549-am1 (2005-03) Ed. 2.0
Amendment 1 - Miscellaneous lamps

MEAS - Measurement, Control and Laboratory equipment

IEC 61010-1 (2010-06) Ed. 3.0
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

MED - Electrical equipment for medical use

IEC 60601-2-28 (2010-03) Ed. 2.0
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

IEC 60601-2-43 (2010-03) Ed. 2.0
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

IEC 60601-2-33 (2010-03) Ed. 3.0
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

MISC - Miscellaneous

IEC 60825-2-am2 (2010-09) Ed. 3.0
Amendment 2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

OFF - IT and office equipment

IEC 62040-3 (1999-03) Ed. 1.0
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

POW - Low voltage, high power switching equipment

IEC 62019-am1 (2002-11) Ed. 1.0
Amendment 1 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

IEC 61851-1 (2001-01) Ed. 1.0
Electric vehicle conductive charging system - Part 1: General requirements

PROT - Installation protective equipment

IEC 60269-2 (2010-04) Ed. 4.0
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J

IEC 60269-3 (2010-05) Ed. 4.0
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

IEC 60269-4 (2009-05) Ed. 5.0
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

PV - Photovoltaics

IEC 62109-1 (2010-04) Ed. 1.0
Safety of power converters for use in photovoltaic power systems - Part 1: General requirements

SAFE - Saftey transformers and similar equipment

IEC 61558-2-5 (2010-06) Ed. 2.0
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units

TOOL - Portable tools

IEC 60745-2-14-am2 (2010-05) Ed. 2.0
Amendment 2 - Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers

IEC 60745-2-17 (2010-05) Ed. 3.0
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers

IEC 60745-2-19-am1 (2010-05) Ed. 1.0
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers

IEC 60745-2-5 (2010-07) Ed. 5.0
Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws

TOYS - Electric Toys

No new IEC standard(s)

HSTS - Hazardous Substances

No new IEC Standard(s)

TRON - Electronics, entertainment

IEC 60065-am2 (2010-07) Ed. 7.0
Amendment 2 - Audio, video and similar electronic apparatus - Safety requirements

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.

WITHDRAWN/REPLACED PUBLICATIONS

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.